Sony CLIE PEG-TJ27 Handbook page 72

Performing the HotSync
When the HotSync
showing the HotSync
CLIÉ handheld.
Note
Do not disconnect your CLIÉ handheld from your computer until
the HotSync
the "Memory Stick" media while the HotSync
performed. Otherwise, Palm™ Desktop for CLIÉ may not
finish normally.
If the HotSync
Make sure that
tray (Notification area**).
If (HotSync) is not displayed in the task tray (Notification
area), click [Start], select [Programs] ([All Programs] for
Windows XP*) - [Sony Handheld], and click [HotSync
Manager]. Check that
tray (Notification area) and tap
your CLIÉ handheld to start the HotSync
The message is displayed on your computer window when the
HotSync
* From this point onwards, where Windows XP Home Edition and
Windows XP Professional are common, they will both be referred to
as Windows XP.
**In Windows XP, the task tray is called "Notification area".
In this manual, it is written as "task tray (Notification area)".
Tip
If you cannot perform the HotSync
Refer to the "Troubleshooting Q&A" (PDF format).
Exchanging and updating files/data using the HotSync
®
operation
®
operation is complete, a message
®
®
operation is complete. Also, do not insert or remove
®
operation does not start
(HotSync) is displayed in the Windows task
®
operation starts.
completion is displayed on your
(HotSync) is displayed in the task
(HotSync) on the screen of
®
operation.
®
operation
®
operation
®
operation is being
72