Sony CLIE PEG-TJ27 Handbook page 120

Performing the IR HotSync
Performing the IR HotSync
You can perform the IR HotSync
computer settings, CLIÉ handheld settings, and Conduit Setup.
1
Rotate the Jog Dial™ navigator to select
the CLIE Launcher and press the Jog Dial™ navigator.
The HotSync screen is displayed.
Tip
You can also tap
2
Tap [Local].
3
Tap V, and select [IR to a PC/Handheld].
4
Point the IR port of your CLIÉ handheld directly to the IR port
of the computer.
For best results, your computer and your CLIÉ handheld should be 4 to 8
inches (approximately 10 to 20 centimeters) apart, and the path between
your CLIÉ handheld and the computer must be clear of obstacles.
5
Tap
The HotSync
A message will be displayed when the HotSync
To restore the local HotSync settings
When performing the local HotSync
settings with a USB cable.
1
Connect your CLIÉ handheld to your computer with a USB
cable.
2
Click
area) at the bottom right of the computer window, and select
[Local USB] from the shortcut menu.
Exchanging and updating files/data using the HotSync
operation (Other HotSync
®
operation
®
®
operation when you have prepared your
(HotSync) to display the HotSync screen.
(HotSync).
®
operation starts.
®
(HotSync) in the Windows task tray (Notification
®
operations)
operation
®
operation is complete.
operation, restore the local HotSync
Continued on next page
• • • • • • • • • • • • • • • • • • •
®
(HotSync) on
120