Sony CLIE PEG-TJ27 Handbook page 132

Performing the HotSync
6
Connect your CLIÉ handheld to your computer with a USB
cable.
7
Rotate the Jog Dial™ navigator to select
the CLIE Launcher and press the Jog Dial™ navigator.
8
Tap
The computer information (Primary PC name and Primary PC address (IP
address)) is transferred to your CLIÉ handheld.
When you perform the HotSync
handheld identifies the computer based on the transferred information.
Preparing your CLIÉ handheld
Follow the steps below to set up your CLIÉ handheld for the HotSync
operation via the LAN.
1
Rotate the Jog Dial™ navigator to select
the CLIE Launcher and press the Jog Dial™ navigator.
The HotSync screen is displayed.
Tip
You can also tap
2
Tap [Local].
3
Tap
The menu is displayed.
4
Tap [LANSync Prefs...] from [Options].
The LANSync Preferences screen is displayed.
5
Tap [LANSync].
Exchanging and updating files/data using the HotSync
operation (Other HotSync
®
operation via LAN (LANSync)
(HotSync).
(HotSync) to display the HotSync screen.
(Menu).
®
operations)
®
operation via LAN, your CLIÉ
®
(HotSync) on
®
(HotSync) on
132