Applications Do Not Operate Properly After A Soft Reset Is; I Cannot Use The Jog Dial ™ Navigator; Error Messages; An Error Message Appears Repeatedly - Sony CLIE PEG-TH55 Frequently Asked Questions Manual

The LCD display cannot be viewed properly (continued)
B If the backlight is off, you can turn it on by sliding down the POWER/
HOLD switch and hold it for more than two seconds.
b
For details, refer to "CLIÉ
the supplied "Read This First (Operating Instructions)".
Applications do not operate properly after a soft reset
is performed
B If you encounter application problems after a reset (such as miss-operations,
an unusual display, or freezing during a soft reset), perform the soft reset
again. If you still cannot solve the problem, try a hard reset.
b
For details, refer to "Basic operations of your CLIÉ
™
CLIÉ handheld" in the supplied "Read This First (Operating Instructions)".
Notes on performing a reset
• After performing a reset, do not press the RESET button of your CLIÉ handheld again until
the Preferences screen or the Setup screen is displayed.
• If you perform a hard reset, all records and add-on applications stored on your CLIÉ
handheld will be deleted.
I cannot use the Jog Dial
™
B The Jog Dial
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Error messages

An error message appears repeatedly

B Perform a soft reset by pressing the RESET button of your CLIÉ handheld.
b
For details, refer to "Basic operations of your CLIÉ
™
CLIÉ handheld" in the supplied "Read This First (Operating Instructions)".
™
handheld components: POWER/HOLD switch" in
™
navigator is not available for some applications.
™
handheld: Restarting your
navigator
™
handheld: Restarting your
15