Marking Laps by Distance
You can use the Auto Lap
comparing your performance over different parts of an activity.
1 From the app drawer, select Setup > Fitness > Auto Lap.
2 Enter a value, and select
Marine Settings
From the app drawer, select Setup > Marine.
Marine Chart Mode: Sets the type of chart the device uses when displaying marine data. Nautical displays
various map features in different colors so the marine POIs are more readable and so the map reflects the
drawing scheme of paper charts. Fishing (requires marine maps) displays a detailed view of bottom contours
and depth soundings and simplifies map presentation for optimal use while fishing.
Appearance: Sets the appearance of marine navigation aids on the map.
Marine Alarm Setup: Sets alarms for when you exceed a specified drift distance while anchored, when you are
off course by a specified distance, and when you enter water of a specific depth.
Setting Up Marine Alarms
1 From the app drawer, select Setup > Marine > Marine Alarm Setup.
2 Select an alarm type.
3 Select On.
4 Enter a distance, and select
Resetting Data and Settings
You can reset trip data, delete all waypoints, clear the current track, or restore default values.
1 From the app drawer, select Setup > Reset.
2 Select an option:
• To reset data specific to a trip, such as distance and averages, select Reset Trip Data.
• To delete all saved waypoints, select Delete All Waypoints.
• To clear the data recorded since you started your current activity, select Clear Current Activity.
NOTE: The device continues to record new data for the current activity.
• To reset the settings for your current activity type to the factory default values, select Reset Activity
Settings.
• To restore all device settings to the factory default values, select Reset All Settings.
NOTE: Resetting all settings clears all geocaching activity from your device.
Restoring Default Values for Specific Settings
You can restore the default values for specific settings categories.
1 From the app drawer, select Setup.
2 Select a category to restore.
3 Select
> Restore Defaults.
Restoring Default Values for Specific Page Settings
You can restore the default values for settings for the map, compass, trip computer, and elevation plot.
1 Open the page for which you will restore the settings.
2 Select
> Restore Defaults.
Customizing the Device
feature to automatically mark the lap at a specific distance. This feature is helpful for
®
.
.
37