Installing Aa Batteries - Garmin Rino 750t Owner's Manual

Installing AA Batteries

Instead of the Lithium-Ion battery pack (Installing the Lithium-ion Battery, page 2), you can use four alkaline,
NiMH, or lithium AA batteries with an optional AA battery pack (not included). This is useful when you are on the
trail and cannot charge the Lithium-Ion battery pack. Use NiMH or lithium batteries for best results.
The AA battery pack contains two parts.
1 If necessary, turn the D-ring counter-clockwise, and pull up to remove the battery pack from the device.
2 Push down on the lever inside the AA battery pack to separate the two parts .
3 Insert four AA batteries, observing polarity.
4 Starting at the bottom, connect the two parts of the battery pack together and press until the top locks into
place.
5 Align the metal contacts on the battery pack with the metal contacts on the back of the device.
4 Introduction