Table of Contents
Advertisement
Publication no. 201102
Marking problems
Film is not marked
No sound
when
inserting a
cassette.
Yes
Open the camera and remove
upper baffle to view the
exposure display. Insert a
cassette.
A picture is
shown on the
exposure
display
Yes
Make a second exposure and
check the lid of the cassettet
Lid is
opened.
Yes
Something is blocking the light from
the exposure display. Check the lens
and the mirror. Check the adjustment
of the exposure unit, see chapter 5.2.
September 2003
No
The cassette sensors are not
correct adjusted. See chapter 5.1.
Background
No
light of the
exposure
display is lit
Problems with cabling or the light
sensor. Check the 20pin data cable.
Check function of the light sensor,
see chapter 5.4.
Ther is problems unlocking the lid.
Run the camera manually by
No
rotating the lead screw to see that
the pin of the carriage either does
not hit th ehole into the lid or if it
fails to unlock it. If the cassette is
not a very special kind th eproblem
is solved by moving the cam
sidewise.
Background light of the exposure
display is broken. Exchange the
exposure display.
30
Either the display or the CPU board is
broken. Switch off the camera and swap
No
the background light connectors between
the operator- and exposure display. Power
on the camera and check wether
background light of the exposure display.
Yes
Inverter on the CPU board is broken.
Exchange the CPU board.
NIC2-2 · Network ID Camera
Background
No
light of the
exposure
display is lit
Yes
Triacon AB Sweden
Advertisement
Table of Contents
