Table of Contents
Advertisement
NIC2-2 · Network ID Camera
There is a standard colour
scheme used by most (all)
connector and cable
manufacturers, base
colour first then the stripe
colour.
1
2
3
4
5
6
7
8
Regardless of what is connected where, shielded connectors, patch cables and installation
cables should be used. The cable should be a "4 pair STP" category 3 or 5. Unfortunately
there does not seem to be any standard name for this equipment that can be referred to
when buying. The only common description seems to be that it is the same equipment as is
used for 10Base-T networks.
Triacon AB Sweden
White/Orange
Orange/White
White/Green
Blue/White
White/Blue
Green/White
White/Brown
Brown/White
This is a picture with pin numbers of
the female MOD8 connector found
at the back of the camera.
7
Publication no. 201102
September 2003
Advertisement
Table of Contents
