Table of Contents
Advertisement
NIC2-2 · Network ID Camera
Opening problem
Opening problems
Carriage gets
stuck at left
end.
Carriage gets
stuck at right
end.
Carriage gets
stuck when
unlocking lid.
Camera only
allows one
marking.
Goto initial problems flowchart.
Triacon AB Sweden
Yes
Goto initial problems flowchart.
There may be two reason. Either the
opening leghth has been changed in the
Yes
camera setup or the pulse counter is
defect. To set the opening length, see
chapter 7.1. To verify the pulse
counter, see chapter 5.3.
Run the camera manually through the
Yes
unlocking by rotating the lead screw
by hand to find what stops it.
This happens because the right or left
cassete sensor does not fall back to
Yes
its inactive position. Enter camera
setup, select sensor adjustment and
verify/adjust the sensors.
29
Publication no. 201102
September 2003
Advertisement
Table of Contents
