Functions Setting Up; Installer Programming - Tador MOON9-KIT User Manual

6. Functions Setting Up

This section explains the settings of each function, please refer to
the following table: About the setting mode:
Input the master code to switch to the setting mode, and input the corresponding setting code
to perform the settings for the function you want. After settings have been made, input the
following setting codes to continue the setting operation. Press " " to exit the setting mode.
•
The example is set as cancel button and # as confirm button,please refer to */# function
 
setting for detail information.
•
Forbid to slide to touch the digital keypad,it may cause mistaken key,the correct
operation is
using your finger to press the digital you desired.
•
You should press"confirm"button after finish inputting the code number
each time, otherwise, the operation will be canceled automatically in 10s.

7. Installer Programming


In order to enter programming mode do as below :
" 1234 + * (star ) "
- When at programing mode blue led will be lighted

Quitting programming mode : " # "

See below table explanation about how to program the unit
-9-