Table of Contents
Advertisement
9.Unlock Operations
Unlocking of user code
When the registered user code has been input using the keypad (1~12 digits), the
LED background indicator lights up, the buzzer sounds,and the electric door strike
is unlocked.(note that you should press "#" button(if "#" button is set to confirm
button) after input the unlock code)
• The time interval during which the button must be pressed is approximately 10
seconds. If the time interval exceeds approximately 10 seconds, the input value
will be cleared.
• If you make a mistake when inputting the user code,press the" cancel" button
and input the user code again.
• The release function is forbidden and the input operation is disabled for 60
seconds if 10 times incorrect access codes are continuously attempted. During
this time,the buzzer will continuously sound about 8 times.
1. During calling,pressing "cancel" button can cancel the calling
2. If input the incorrect access code,the buzzer will sound of beep,beep,beep
10.Specifications
• Power Supply :
• Power Consumption:
• Camera:
•
• Unlocking time:
• Lock Power supply:
• Number of relay circuits:
support)
• Mounting:
•
• Working temperature:
• Dimension:
•
DC 24V ;
Standby 15mA; Working status 105mA;
Color CMOS, 2.0 Mega pixel
1/2.7'' fisheye camera,170
1~99s
12Vdc, 280mA(Internal Power);
2(the second lock need external device to
Surface
mounting(DT611/MK)
Flush mounting
(DT611F/MK)
-15ºC ~ +55ºC
182(H)×93(W)×44(D)m
m(DT611/MK)
220(H)×120(W)×50(D)mm(DT61
1F/MK)
-12-
0
wide angle;
Advertisement
Table of Contents
