Table of Contents
Advertisement
Dial all of the monitors
simultaneously
Dial a specific monitor
Pressing sound : on
Pressing sound : off
Silence mode
Audio volume
In case that is more than two panels at an installation it is possible to set one panel to dial all of the
tenants and the other panel to dial a specific monitor this is usually being used when there is a
multi-building panel at the entrance and a regular panel for example at gym or a tenant that has a
separate entrance.
Multi building mode : on
Multi building mode : off
Set the panel to dial different
tenant
Apartment mode : Default mode
8. Opening the door
If want to open the door :
type the access code + *
(code) + ( star )
Special settings
*1234*100*0*
*1234*100*1*05*
*1234*05*0*
*1234*05*1*
*1234*09*5*
Multi apartment settings
*1234*100*0*
*1234*100*1*
*1234*101*12*
*1234*100*1*
-11-
This will set the panel to dial all
of the monitors which are in the
address 0 – 32 simultaneously.
In this example it will set the
panel to dial monitor which has
number "5"
You can type 01-32 to decide
which of the monitor the panel
will dial
This will cause the panel to beep
when one of the keys in the
keypad will be pressed
This will cause the panel to be in
silence mode when one of the
keys in the keypad will be
pressed no beeping
You can adjust the audio volume
at the panel
possible to choose between
1 – 9 according to the
requirment
This will set the panel to dial
monitor number 12
Panel will dial all monitors in the
house together ( 0 - 15 )
Advertisement
Table of Contents
