Opening The Unit; To Open The Front Panel; To Remove The Front Panel - Daikin FTXA20C2V1BW Installer's Reference Manual

6 | Unit installation

6.2 Opening the unit

6.2.1 To open the front panel

6.2.2 To remove the front panel

Installer reference guide
24
1 Hold the front panel on both sides and open it.
2 Pull down both locks on the back of the front panel.
3 Open the front panel until the support fits into the fixing tab.
a Lock (1 on each side)
b Backside of the front panel
c Fixing tab
d Support
INFORMATION
Remove the front panel only in case it MUST be replaced.
1 Open the front panel. See
2 Open the panel locks located on the back side of the panel (1 on each side).
a
a Panel lock
3 Push the right arm lightly to the right to disconnect the shaft from the shaft
slot on the right side.
a
b
a
"6.2.1 To open the front
b
c
c
d
4
panel" [ 24].
a
CTXA-C(W)(B)(S) + FTXA-C(W)(B)(S)
Daikin room air conditioner
4P518023-15P – 2023.05