Pro-Form PFTL15820-INT.2 User Manual page 26

HOW TO USE THE SOUND SYSTEM
To play music or audio books through the console
sound system while you exercise, you can connect
your Bluetooth-enabled device to the console.
You can then adjust the volume
level using the volume buttons
on the console or the volume
control on your personal audio
device.
1. Make sure your device's Bluetooth setting
is turned on, and place or hold it near the
console.
2. Press and hold the Bluetooth Audio button on
the console's speaker grill for 3 seconds.
A tone will sound and the
Bluetooth button will begin
flashing to indicate that the
console has entered pairing
mode.
3. Pair your device to the console.
Once your device and the console pair success-
fully, the audio from your device will play through
the console's speakers.
Note: The console can save eight devices in its
memory. If you have previously paired your device
to the console, you can simply press the Bluetooth
Audio button to connect your device to the console.
4. Erase the console's device memory if
necessary.
If you need to erase all the Bluetooth-enabled
devices saved in the console's memory, press and
hold the Bluetooth Audio button for 10 seconds.
THE OPTIONAL HEART RATE MONITOR
Whether your
goal is to
burn fat or to
strengthen your
cardiovascular
system, the key
to achieving the
best results is
to maintain the
proper heart
rate during your
workouts. A wearable rate monitor will enable you to
continuously monitor your heart rate while you exer-
cise, helping you to reach your personal fitness goals.
To purchase a wearable heart rate monitor, please
see the front cover of this manual.
Note: The console is compatible with all Bluetooth
Smart heart rate monitors.
To connect a wearable heart rate monitor to the
console, first put it on as directed in its included
instructions. Then, when you begin a workout or start
the walking belt in the manual mode, the console
will search for the wearable heart rate monitor for 30
seconds and connect automatically.
26