Focusrite Scarlett 18i8 Manual page 9

Usb audio interface and focusrite control

Hide thumbs Also See for Scarlett 18i8:

The Output Control Panel

The output control panel allows you to switch between the configurations of each output

The green light indicates that Focusrite Control is connected to

the Scarlett 18i8.

This controls outputs 1-2, your primary outputs for speak

monitors. This should always be set to stereo.

This controls auxiliary outputs 3-4 which you will likely never

need to use. These outputs are only used if there are output

devices plugged into outputs 3-4.

This controls headphone output 1 on the audio interface. This

should generally be to set to Custom Mix and Stereo.

This controls headphone output 2 on the audio interface. This

should generally be to set to Custom Mix and Stereo.

S/PDIF is an optical output that is not used by the library. If you are

aware of this kind of output and intend to use it, you probably

don't need this user guide.

Activating Loopback enables recording audio from other

applications on your computer, like your internet browser or

Zoom. Loopback uses virtual inputs 11 and 12.

Table of Contents