Focusrite Scarlett 18i8 Manual page 3

Usb audio interface and focusrite control

Hide thumbs Also See for Scarlett 18i8:

The Interface

1. Gain Dial: Use this to adjust the input level of each channel. Check sound at its loudest level to

ensure there is no clipping.

2. Mode Indicator: Illuminated icons AIR, INST, PAD reflect the input settings in Focusrite Control.

3. Headphone Jack: Independent ¼" headphone jack and volume dial

4. Input jack: Channels 1-2 support XLR/TRS/TS and Channels 3-4 support XLR/TRS

5. 48V Phantom Power: for using with condenser microphones or the In-line preamps.

6. Monitor Volume: This dial controls the volume level of the speaker/monitor output.

1. ON/OFF Switch

2. USB-C Port: Connect the device to the computer with the appropriate USB cable

3. MIDI In/Out: To connect non-USB MIDI devices

4. Output Jacks: To connect speaker monitors (Channels 1 and 2 only)

5. Line Inputs: For connecting instruments via TS or TRS cables like guitar, bass or keyboards or mixers

Table of Contents