Focusrite Scarlett 18i8 Manual page 35

Usb audio interface and focusrite control

Hide thumbs Also See for Scarlett 18i8:

Using In-line Preamps

Cloudlifter CL-2 & Triton FetHead

Overview

Dynamic microphones like the SM7B or SM58 sometimes require an additional gain boost

to achieve a satisfactory input level. The preamplifiers available can be applied to the

microphone signal chain to produce a 25dB gain increase, meaning you can use a much lower

gain setting on the audio interface input.

•

Triton Preamps are pre-installed on the SM58s in the Control Room which means these

mics require 48v Phantom Power to be switched on.

•

The CL-2 Cloudlifter can be paired with the SM58 or SM7B in the Live Room and

will require 48v phantom power to work.

•

The Cloudlifter and FetHead are designed only to be used with dynamic microphones--the

SM7B and SM58. Do not use these preamplifiers with the RODE NT1A, RODE NT5 or

Behringer C1.

Triton FetHead Preamp

The FetHead Preamplifier is inserted in the signal chain, between the microphone and the

audio interface. It is plugged into the XLR output at the base of the microphone. Remember to

activate 48v phantom power on the audio interface

Table of Contents