Focusrite Scarlett 18i8 Manual page 11

Usb audio interface and focusrite control

Hide thumbs Also See for Scarlett 18i8:

Loopback In Reaper

In Reaper, the virtual inputs Channels 11 and 12 will display as Loop1 and Loop 2 in the Audio Device

configurations. First, select Focusrite USB ASIO as the Driver, then go to Options → Preferences →

Device and under inputs, for first, select 11: Loop 1 and for last, select 12: Loop 2.

In your track, make sure to arm

AND mute the track before

recording. Hit record and then

play the source audio.

Loopback in Ableton Live

In Ableton, you will have to enable Channels 11 and 12 in input configurations. Go to

Options→Preferences→Audio→Input Config and click on 11&12.

Once your channels are

configured, send channels

11 & 12 to an audio track

in your Ableton project,

remembering to arm the

track, but mute it as well.

Table of Contents