D-Link M30 User Manual page 92

Section 3 - Configuration
Status LED: Choose to enable or disable the status LED indicator on
the router and other Mesh Point(s). When disabled, the LED
will not turn solid white during normal operation.
When enabled, the LED will still light up in the corresponding
colors and modes for the following circumstances:
Conditions
Firmware upgrade
Device reboot
Establishing a WPS connection
Weak uplink signal
No uplink signal
Once any of the above situations change, the LED will briefly light up
and then turn off again.
D-Link M30 AX3000 Dual-Band Wi-Fi 6 Router User Manual
Admin
LED Control
LED Behavior
Interleaving white/orange
Breathing red
Breathing white
Breathing white
Breathing orange
88