Table of Contents
Advertisement
Section 3 - Configuration
DHCP IP Address
Enter the starting and ending IP addresses for the DHCP server's IP
Range:
assignment.
Note: If you have reserved static IP addresses for client devices, make sure
the IP addresses are outside of this range or you might have an IP conflict.
DHCP Lease
Enter the length of time for the IP address lease in minutes. The default
Time:
is 10,800 minutes.
Always
Enable this feature to broadcast your network's DHCP server to LAN/
Broadcast:
WLAN clients.
WAN Port Speed:
You may set the port speed of the Internet port to 10 Mbps, 100 Mbps,
1000 Mbps, or Auto (recommended).
UPnP:
Enable or disable Universal Plug and Play (UPnP). UPnP provides
compatibility with networking equipment, software, and peripherals.
This is enabled by default.
IPv4 Multicast
Enable to allow IPv4 multicast traffic to pass through the router from
Streams:
the Internet. This is enabled by default.
IPv6 Multicast
Enable to allow IPv6 multicast traffic to pass through the router from
Streams:
the Internet. This is enabled by default.
D-Link M30 AX3000 Dual-Band Wi-Fi 6 Router User Manual
DHCP Server
Advanced Settings...
Network
63
Advertisement
Table of Contents
