Qos Engine - D-Link M30 User Manual

Section 3 - Configuration
The Quality of Service (QoS) Engine allows you to prioritize particular
clients over others so that certain clients receive higher bandwidth.
Click Check Speed to run a speed check and determine how to distribute
Wi-Fi bandwidth to prioritized devices. The speed test helps the QoS
engine distribute Wi-Fi bandwidth to prioritized devices (configured in
the device cards below).
In the Features tab on the left side of the page, click QoS Engine.
AI Traffic
The intelligent QoS Engine lists devices consuming
Optimizer: comparatively large resources and will intelligently adjust bandwidth
to these devices by assigning them a low priorty.
Once this is turned on, you will start to receive weekly reports
on bandwidth usage through AI Assistant.
Download Speed Enter the maximum download speed (in Mbps) for all connected clients.
(Mbps):
If QoS is enabled, clients will not be able to exceed this value.
Upload Speed
Enter the maximum upload speed (in Mbps) for all connected clients .
(Mbps): If QoS is enabled, once this threshold is reached, traffic of clients with
higher priority will be processed first, while traffic of lower priority
clients will need to wait until enough bandwidth becomes available.
Click Apply to QoS after the Speed Test to automatically fill in the
above information.
D-Link M30 AX3000 Dual-Band Wi-Fi 6 Router User Manual

QoS Engine

69