Table of Contents
Advertisement
Section 3 - Configuration
Select PPPoE if your ISP provides and requires you to enter a PPPoE username and password in order to connect to the
Internet. Click Save at any time to save the changes you have made on this page.
PPPoE Session:
Select Create a new session to start a new PPPoE session.
Username:
Enter the username provided by your ISP.
Password:
Enter the password provided by your ISP.
Address Mode:
Select Static IP if your ISP assigned you an IP address. In most cases,
select Dynamic IP.
IP Address:
If you select Static IP as the Address Mode, enter the IP address
provided by your ISP.
Service Name:
Enter the ISP service name (optional).
Reconnect Mode:
Select either Always On or Manual.
MTU:
The default Maximum Transmission Unit is 1492- you may need to
change the MTU for optimal performance with your ISP.
D-Link M30 AX3000 Dual-Band Wi-Fi 6 Router User Manual
IPv6 - PPPoE
47
Advertisement
Table of Contents
