Table of Contents
Advertisement
Section 3 - Configuration
Select Dynamic IP (DHCP) to automatically obtain IP address information from your ISP. Select this option if your ISP does not
specify an IP address for use. Click Save at any time to save the changes you have made on this page.
Host Name:
The host name is optional but may be required by some ISPs. Leave
it blank if you are not sure.
Primary DNS
Enter the primary DNS server IP address assigned by your ISP. This
Server:
address is usually automatically obtained from your ISP.
Secondary DNS
Enter the secondary DNS server IP address assigned by your ISP. This
Server:
address is usually automatically obtained from your ISP.
MTU:
Maximum Transmission Unit - The default is 1500. You may need to
change the MTU for optimal performance with your ISP.
MAC Address
The default MAC address is set as the physical interface MAC address
Clone:
of port 1 on the router. You can use the drop-down menu to replace
the Internet port's MAC address with the MAC address of a connected
client.
D-Link M30 AX3000 Dual-Band Wi-Fi 6 Router User Manual
IPv4 - Dynamic IP (DHCP)
Advanced Settings...
32
Advertisement
Table of Contents
