Yamaha 5KM2-AE1 Service Manual page 60

É Fasten the handlebar switch lead and rear brake
light switch lead with a plastic band.
Ê Fasten the thermo switch 2 lead, fan motor lead,
coolant reservoir breather hose, coolant reser-
voir hose, gear motor lead and differential gear
case breather hose with a plastic band. Install
the plastic band facing inward.
Ë Fasten the gear motor lead and differential gear
case breather hose with a plastic band. Be sure
not to pinch the hose. Install the plastic band
facing inward.
3
2
1
6
4
8
7
Í
Ì
C
B
CABLE ROUTING
Ì Pass the brake hose through the hose guide.
Í Fasten the on-command four-wheel drive switch
and differential gear lock switch lead, front brake
light switch lead, handlebar switch lead, and rear
brake light switch lead with a plastic locking tie.
È
É
5
2 - 28
SPEC
4
5
2
9
0
3
Ê
A
Ë