Yamaha 5KM2-AE1 Service Manual page 289

FRONT CONSTANT VELOCITY JOINTS AND
DIFFERENTIAL GEAR
Adjusting differential gear lash
1.Remove:
Shim(s) (left) 1
G
Differential gear assembly 2
G
Shim(s) (right) 3
G
2.Adjust:
Gear lash
G
*****************************************************
Adjustment steps:
G
Select the suitable shims using the following
chart.
Too little gear lash
Too large gear lash
G
If it is necessary to increase by more than
0.05 mm (0.002 in):
Reduce right shim thickness by 0.1 mm
(0.004 in) for every 0.1 mm (0.004 in) of left
shim increase.
G
If it is necessary to reduce by more than
0.1 mm (0.004 in):
Increase right shim thickness by 0.1 mm
(0.004 in) for every 0.1 mm of left shim
decreased.
Ring gear shim (left and right)
Thickness (mm)
7 - 16
DRIV
Reduce shim thick-
ness.
Increase shim thick-
ness.
0.1 1.0
0.2 1.5
0.3 2.0
0.4 2.5
0.5