Yamaha 5KM2-AE1 Service Manual page 115

Table of Contents

Advertisement

ADJUSTING THE REAR BRAKE
G
G
G
NOTE:
When adjusting the brake pedal height make
sure the locknut-to-adjusting bolt clearance b
does not exceed 2 mm (0.08 in).
G
G
NOTE:
Make sure the pin 8 is all the way to the right
of the link plate hole.
G
G
G
3 - 40
Loosen the locknut 4.
Turn the adjusting bolt 5 until the brake
pedal height is within the specified limits.
Rear brake pedal height:
45 mm (1.77 in)
Tighten the locknut 4.
Loosen the locknut 6.
Pull up the brake outer cable and turn the
brake cable adjusting (nut) 7 until the clear-
ance c is within the specified limits.
Clearance c:
1 mm (0.04 in)
Hold the adjusting nut 7 and tighten the
locknut 6.
Turn the brake lever cable adjuster (handle-
bar) 2 until the rear brake lever free play d
is within the specified limits.
Rear brake lever free play:
0.5 ~ 2 mm (0.02 ~ 0.08 in)
Tighten the locknut (handlebar) 1.
CHK
ADJ

Advertisement

Table of Contents
loading

This manual is also suitable for:

Yfm660f(p) 2002

Table of Contents