Yamaha 5KM2-AE1 Service Manual page 113

CLEANING THE SPARK ARRESTER
3 - 38
G
Tap the tailpipe lightly with a soft-face ham-
mer or suitable tool, then use a wire brush to
remove any carbon deposits from the spark
arrester portion of the tailpipe and the inner
contact surfaces of the muffler.
Insert the tailpipe 2 into the muffler and
G
align the bolt holes.
Insert the bolt 1 and tighten it.
G
G
Start the engine and rev it up approximately
twenty times while momentarily creating
exhaust system back pressure by blocking
the end of the muffler with a shop towel.
G
Stop the engine and allow the exhaust pipe
to cool.
*****************************************************
CHK
ADJ