Yamaha 5KM2-AE1 Service Manual page 27

Tool No.
Adapter
Adapter
90890-04059
Spacer (crankshaft installer)
YM-90069
Spacer
These tools are used to install the crank-
90890-04081
YM-91044
shaft.
Universal joint holder
90890-04062
YM-04062
This tool is needed when removing or
installing the universal joint yoke nut.
Valve guide remover (ø 6)
90890-04064
YM-04064-A
This tool is needed to remove and install
the valve guide.
Valve guide installer (ø 6)
90890-04065
YM-04065-A
This tool is needed to install the valve
guide.
Valve guide reamer (ø 6)
90890-04066
YM-04066
This tool is needed to rebore the new
valve guide.
Universal clutch holder
90890-04086
This tool is needed to hold the clutch car-
YM-91042
rier when removing or installing the car-
rier nut.
Bearing retainer wrench
90890-04128
This tool is needed when removing or
YM-04128
installing the middle driven pinion gear
bearing retainer.
Sheave spring compressor
90890-04134
YM-04134
This tool is needed when removing or
installing the secondary sheave spring.
Sheave fixed block
90890-04135
YM-04135
This tool is needed when removing or
installing the secondary sheave spring.
Tool name/How to use
1 - 16
SPECIAL TOOLS
Illustration
GEN
INFO