Table of Contents
Advertisement
Read all installation guidance in this document to see if the unit has been correctly installed.
Ensure that installation has been completed correctly before use.
TO BE COMPLETED BY THE INSTALLER
Ensure that:
F
Is the cooktop earthed?
F
Check that there is an adequate and constant flow of cool air from the cabinetry to
the base of the cooktop.
Check that the power supply cable is not accessible via cupboard doors or drawers
F
and that it is NOT touching the cooktop.
Is the cooktop clamped down securely?
F
F
Check that the pan detection feature is working correctly. Turn on each cooking zone
without putting any cookware on them. Are all the displays flashing?
F
Check that all the cooking zones function correctly. Place suitable pans with water in
them on each zone, then turn all of them on to a high setting. Is the water heating?
Complete and keep for safe reference:
Model
Serial No.
Purchase Date
Purchaser
Dealer Address
Installer's Name
Installer's Signature
Installation Company
Installation Date
INSTALLER CHECKLIST
F
Are all touch controls and displays functioning?
F
To check that the 'hot surface' indicators function correctly, turn off all the zones.
H
Is
displayed in all the cooking zone displays?
F
F
Have you demonstrated the basic operation to the customer?
Explain the following to the customer:
1 The importance of taking note of the safety warnings at the beginning of the user
guide, especially for persons with pacemakers or other electrical implants.
2 The 'hot surface' indicators.
3 Using induction suitable cookware only.
4 The pan detection feature.
13
Advertisement
Table of Contents
