Table of Contents
Advertisement
1
Adhesive tape
2
3
FLUSH INSTALLATION
Prepare the countertop for flush
installation. Use a router to cut
out the edges of the countertop
to specified depth (5mm).
Attach an adhesive tape along
the edges of the routered recess.
Gently lower the cooktop into the
cutout ensuring you have access
below the countertop to fit and
secure the brackets.
Locate the side brackets* to the
appropriate slots on the cooktop
chassis. The correct slot height
is determined by the thickness
of your countertop.
4
5
6
Tighten all screws to secure the
cooktop to the countertop.
Ensure cooktop is level.
Mask off the area to be siliconed
ensuring both the cooktop and
countertop are protected.
Apply silicone in the gap
between benchtop and cooktop
Wipe off excess silicone.
11
Advertisement
Table of Contents
