Table of Contents
Advertisement
This cooktop must be connected to the mains power supply only by a suitably qualified
person. To connect the cooktop to the mains power supply, do not use adapters, reducers, or
branching devices, as they can cause overheating and fire. The power supply cable must not
touch any hot parts and must be positioned so that its temperature will not exceed 75°C at
any point. Check with an electrician whether the domestic wiring system is suitable without
alterations. Any alterations must only be made by a qualified electrician.
Before connecting the cooktop to the mains power supply check that:
The domestic wiring system is suitable for the power drawn by the cooktop.
z
The voltage corresponds to the value given in the rating plate.
z
The power supply cable sections can withstand the load specified on the rating plate.
z
RECOMMENDED
MODEL
DEDICATED CIRCUIT
CI604CTPB1
12
ELECTRICAL CONNECTION
RATED LOAD
VOLTAGE
20
4400W
230V 1N
SINGLE-PHASE CONNECTION (220-240 V~)
Single-phase connection (220-240 V~)
2
4
1
3
5
N
L
PE
Ensure cable is tightened with screw.
You may have to remove the screw first
before fitting the clamp.
clamp
E
screw
L
N
Advertisement
Table of Contents
