Related Manuals for Fisher & Paykel CI804CTB
Summary of Contents for Fisher & Paykel CI804CTB
- Page 1 Using your induction cooktop CI704CTB model CI604CTB model CI904CTB model CI804CTB model https://producthelp.fisherpaykel.com/au/Cook/Cooktops/Induction/Four_Burners/CI904CTB1/User_Guide_CI904CTB1/04_Usi… Updated: Sun, 16 Aug 2020 01:40:18 GMT Powered by...
- Page 2 Cooking Zone Zone Diameter Power Powerboost Recommended Minimum Pan Size 200 mm 2300 W 3000 W * 145 mm 160 mm 1200 W 1400 W * 110 mm * Maximum output when set on PowerBoost. Touch controls overview These indicators show which cooking zone(s) the timer is set for: https://producthelp.fisherpaykel.com/au/Cook/Cooktops/Induction/Four_Burners/CI904CTB1/User_Guide_CI904CTB1/04_Usi…...
-
Page 3: To Start Cooking
To select a setting on the selector: slide your finger along the selector. Touch at one point to “jump” to a specific setting To start cooking 1. Touch and hold the ON/OFF control for 2 seconds. will appear in the cooking zone displays. •... - Page 4 3. Place a suitable pan on the cooking zone you wish to use. • Make sure the bottom of the pan and the surface of the cooking zone are clean and dry. 4. Touch the display of the cooking zone you wish to use.
-
Page 5: When You Have Finished Cooking
5. Select a heat setting by touching or sliding the setting selector with your finger. to adjust. • Adjust the heat setting by touching or sliding the • The setting will appear in the display of the setting selector with your finger. selected cooking zone. - Page 6 2. Decrease its heat setting until the display shows 1. To turn off an individual cooking zone . If the cooking zone surface is too hot to touch, Select the cooking zone you want to turn off. will replace in the display. To turn the whole cooktop off https://producthelp.fisherpaykel.com/au/Cook/Cooktops/Induction/Four_Burners/CI904CTB1/User_Guide_CI904CTB1/04_Usi…...
-
Page 7: Locking The Controls
Turn the whole cooktop off by touch and holding the ON/OFF control. Beware of hot surfaces will appear in the display of any cooking zone that is too hot to touch. It will remain on and steadily lit even when the cooktop is turned off. - Page 8 2. Touch and hold the keylock control for a few seconds. The indicator light above the control goes out. 3. You can now start using your cooktop. Do not lock the controls while a cooking zone is in use. If you do, you can always turn the cooktop off with the ON/OFF control in an emergency.