Biostar NF500-A2G Setup Manual page 88

NF500-A2G / NF500 AM2
CPU Fan Full speed <℃>
When CPU temperature is reach the set value, the CPU fan will work under Full
Speed.
The Choices: Min= 0, Max= 127, you can key in a DEC number.
Start PWM Value
When CPU temperature arrives to the set value, the CPU fan will work under
Smart Fan Function mode. The range is from 0~127, with an interval of 1.
The Choices: Min= 0, Max= 127, you can key in a DEC number.
Slope PWM
Increasing the value of slope PWM will raise the speed of CPU fan.
The Choices: 0 PWM Value/℃, 1 PWM Value/℃, 2 PWM Value/℃ (default),
4 PWM Value/℃, 8 PWM Value/℃, 16 PWM Value/℃, 32 PWM Value/℃,
64PWM Value/℃.
Show H/W Monitor in POST
If you computer contains a monitoring system, it will show PC health status
during POST stage. The item offers several different delay times.
The Choices: Enabled (default), Disabled.
CPU Vcore, NB/SB Volt, +3.3V, +5.0V, +12.0V, DDR Voltage,
FSB Voltage, 5V(SB), Voltage Battery
Detect the system's voltage status automatically.
CPU Temp
This field displays the current temperature o f CPU.
Current CPU FAN Speed
This field displays the current speed o f CPU fan.
Current SYS FAN Speed
This field displays the current speed SYSTEM fan.
34