Biostar NF500-A2G Setup Manual page 20

Motherboard Manual
He ade r for Memory Voltage O ve rclocking: JDDRII_2.2V
When processing Memory Voltage Ov erclocking, please place the jumper to
pin1-2 Closed. The Default setting is Pin 2-3 Closed.
Note:
1. When "JDDRII_2.2V" jumper cap is placed on Pin 2-3, memory v oltage
can be manually adjusted under CMOS setup.
2. When "JDDRII_2.2V" jumper cap is placed on Pin 1-2, memory v oltage
will be f ixed at 2.2V automatically, and can't be adjusted under COMS
setup.
Bef ore setting memory v oltage ov erclocking, please ensure that y our memory
module supports up to 2.2V. (Consult y our memory module supplier)
JSPDIF_O UT1: Digital Audio-out Conne ctor
This connector allows user to connect the PCI bracket SPDIF output header.
18
3
1
Pin 1-2 Close:
Memory voltage 2.2V.
3
3
1
1
Pin 2-3 Close:
Normal status (default).
3 1
Pin Assignment
1 +5V
2 SPDIF_OUT
3 Ground