Biostar NF500-A2G Setup Manual page 82

NF500-A2G / NF500 AM2
Soft-Off by PWR-BTN
This item determines the behavior of system power button. Instant off turn o ff
the power immediately, and Delay 4 Sec. will require you to press and hold the
power button for 4 seconds to cut off the system power.
The Choices: Delay 4 Sec, Instant-Off (default).
OL(PME )/ Fr om Soft-Off
W #
This item allows you to enable or disable Wake On LAN from Soft-Off
function.
The Choices: Disabled (default), Enabled.
OR(RI ) Fr om Soft-Off
W #
This item allows you to enable or disable Wake On Ring from Soft-Off fun ction.
The Choices: Disabled (default), Enabled.
USB Resume from S3
This item allows you to wake up from S3 with USB device.
The Choices: Disabled (default), Enabled.
Power-On by Alarm
This function is for setting date and time for your computer to boot up. When
enabled, you can choose the date and time to boot up the system.
The Choices: Disabled (default), Enabled.
Date (of Month) Alarm
You can choose which month the system will boot up.
Time (hh:mm:ss) Alarm
You can choose the system boot up time, input hour, minute and second to
speci fy.
Note: If you have change the setting, you must let the system boot up until it
goes to the operating system, before this fun ction will work.
POWER ON Function
This item allows you to choose the power on method.
The Choices: Button Only (default), Password, Hot Key, Mouse/Click, Mouse
Double/Click, Any Key, Keyboard 98.
KB Power ON Password
Input password and press Enter to set the Keyboard power on password.
28