Biostar NF500-A2G Setup Manual page 66

NF500-A2G / NF500 AM2
Security Option
This option will enable only individuals with passwords to bring the system
online and/or to use the CMOS Setup Utility.
System:
required to access the Setup Utility.
Setup (default):
This will only apply if passwords are set from the Setup main menu.
APIC MODE
Selecting Enabled enabl es APIC device mode reporting from the BIOS to the
operating system.
The Choices: Enabled (default), Disabled.
MPS Version Control For OS
The BIOS supports version 1.1 and 1.4 of the Intel multiprocessor speci fication.
Select version supported by the operation system running on this computer.
The Choices: 1.4 (default), 1.1.
OS Select For DRAM > 64MB
A choice other than Non-OS2 is only used fo r OS2 systems with memory
exceeding 64MB.
The Choices: Non-OS2 (default), OS2.
Summary Screen Show
This item allows you to enable/disable the summary screen.
means system configuration and PCI device listing.
The Choices: Disabled (default), Enabled.
A password is required for the system to boot and is also
A password is required to access the Setup Utility only.
12
Summary screen