Biostar NF500-A2G Setup Manual page 71

NF500-A2G / NF500 AM2
Dram on-die Termination
The Choices: AUTO(Default), 75ohm, 150ohm, 50oham.
Read/Write Queue bypass
The Choices: AUTO (Default).
Bypass maximum
The Choices: AUTO (Default).
32 Byte Granularity
The Choices: AUTO (Default), 64-byte, 32-byte.
Timing Mode
The Choices: AUTO (Default), MaxMemCLK.
Memory Clock value or Limi
The Choices: DDR 400 (Default).
DQS Training Control
The Choices: P erform DQS, Skip DQ S (default).
CKE base pow er dow n mode
The Choices: Enabled (default), Disabled.
CKE base pow erdow n
The Choices: Per Channel (default), P er CS.
Memclock tri-stating
The Choices: Disabled (default), Enabled.
Memory Hole Remapping
The Choices: Enabled (default), Disabled.
Auto Optimize Bottom IO
The Choices: Enabled (default), Disabled.
Bottom of [31:24] IO space
Auto Optimaize Maximal DRAM size when kemel Assigns P CI Resources
Done.
The Choices: C0 (default).
DDRII Timing Item
The Choices: Disabled (default), Enabled.
17