Leakage Detection - Ariston AXIOS LUX ECO Instruction Manual

Leakage detection

The product is supplied with a Leakage Sensor cable, which should be placed in
the drip tray as shown in the picture Fig.11. This is to ensure that the sensor will
most likely be able to detect a water leak. The function of the Leakage Sensor is
to detect water presence in the drip tray and prevent damage caused by flooding.
In the unlikely event that this occurs:
•
The sign "driP" will appear on the HMI (Fig.12);
•
"HEATING" LED blinks;
•
The HMI buzzer starts sounding;
Fig. 11
To stop the sound and switch off the geyser press the power
HMI is on, the buzzer will start to sound again.
Caution: During the leakage intervention, power supply to the water heater will
not be interrupted. To switch off the power supply, press the Power
on the HMI module.
To reset the water heater, call the Ariston Call Centre on 010 745 9911. When this
fault occurs, only a specialized technician can reactivate the water heater.
Fig. 12
- 8 -
button. If the
button