Different Operating Modes; First Connection - Ariston AXIOS LUX ECO Instruction Manual

Different Operating Modes

This product can operate in different modes,
1. Manual Mode: This is the default mode in factory setting. This mode allows
users to set the desired temperature between 40° C and 70 °C.
2. Timer Mode: This mode allows users to set the time in a day when hot water
is required. There are three programs in this timer mode;
a.
Program 1, T1 – [Default set time is 05:00] At this set time, hot water
will be available at the predefined temperature.
b.
Program 2, T2
will be available at the predefined temperature.
c.
Program 3, T1&T2 – This is a combination of the above 2 programs.
3. Eco Evo: This is the most efficient mode. No temperature adjustment is
allowed by the user in this mode, product will determine the hot water
temperature as per the energy demand in the learning period.
4. Eco Evo Plus: In this mode the timer programs are activated along with Eco
Evo mode. This mode will make sure there is hot water at the pre-determined
temperature at the time based on the timer program. No temperature
adjustment is allowed in this mode; the user can set the time when the hot
water to be used.
For adjusting the temperature and choosing the different modes, refer to the
relative sections.

First connection

Product is supplied with a human-machine interface (henceforth referred to as
"HMI"), as shown in Fig.3 and Fig.4.
HMI buttons and LEDs are indicated as follows:
a. Button "ECO EVO";
b. Button "T1";
c. Button "T2";
d. LED "ECO EVO", on if the function "ECO" is active;
e. LED "T1", on if the function "Program 1" ("T1" from now on) is active;
f. LED "T2" on if the function "Program 2" ("T2" from now on) is active;
g. LED "HEATING", on if the heating element is on (heating phase);
h. Power button " "
i. Button "+";
j. Button "SET";
k. Button "-".
-
[Default set time is 16:00] At this set time, hot water
- 2 -