Table of Contents
Advertisement
To increase the number of languages
Please take care that your battery is fully charged!
1
Make sure that your computer is connected to the Internet.
2
Plug the USB cable into the USB port on the computer.
3
Plug the other end of the USB cable into the camera's multi-connector.
• The camera turns on automatically.
• The monitor turns on and the selection screen for the USB connection is displayed.
4
Select [STORAGE] and press the i button.
5
In the browse window, select "Camera", then "Update Camera/Add Display
Language".
• The confirmation window for updating is displayed.
6
Click "OK".
• The updating the camera window is displayed.
7
Click "Add Language" in the updating
camera display.
• The "Add Display Language of Camera" window
is displayed.
8
Click
9
Click "Add".
• The new language is downloaded to your camera.
Please do not remove any cable or the battery while the
camera is processing.
10
After the download procedure the camera display
will show "OK". You can remove the cables and
turn power off. After restarting the camera you will be able to choose the new
language from [W].
Transferring images to your computer without using
OLYMPUS Master
Your camera supports the USB Mass Storage Class. You can transfer images to a computer
11
by connecting the camera to the computer with the provided USB cable. This can be done
even without using OLYMPUS Master. The following operating systems are compatible with
the USB connection:
Windows
: 2000 Professional/XP Home Edition/XP Professional/Vista
Macintosh : Mac OS X v10.3 or later
x
Notes
• If your computer is running Windows Vista, select [MTP] in Step 3 on page 107 to use
Windows Photo Gallery.
• Data transfer is not guaranteed in the following environments, even if your computer is
equipped with a USB port.
• Computers with a USB port added by means of an extension card, etc.
110
• Computers without a factory-installed OS and home-built computers
EN
and select a language.
Advertisement
Table of Contents
