Sharp MX-C358F User Manual page 24

Set up, install, and configure
Creating a shortcut
1
From the home screen, touch Shortcut Center.
Note: The icon and name may have been changed. For more information, contact your administrator.
2
Select a printer function, and then touch Create Shortcut.
Note: The Secure E‑mail function is not supported.
3
Configure the settings, and then touch Save.
4
Type a unique shortcut name.
Note: To avoid clipped names on the home screen, type only up to 25 characters.
5
Touch OK.
The application automatically generates a unique shortcut number.
Note: To launch the shortcut, touch
Setting up Card Copy
1
Open a web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the web page correctly.
2
Click Apps > Card Copy > Configure.
Notes:
•
Make sure that Display Icon is enabled.
•
Make sure that E‑mail Settings and Network Share Settings are configured.
•
When scanning a card, make sure that the scan resolution does not exceed 200 dpi for color and
400 dpi for black and white.
•
When scanning multiple cards, make sure that the scan resolution does not exceed 150 dpi for color
and 300 dpi for black and white.
3
Apply the changes.
Note: You need a printer hard disk or an intelligent storage drive to scan multiple cards.
Using Display Customization
Before using the application, make sure to enable and configure the screen saver, slideshow, and wallpaper
settings from the Embedded Web Server.
Managing screen saver and slide show images
1
From the Embedded Web Server, click Apps > Display Customization > Configure.
2
In the Screen Saver and Slideshow Images section, add, edit, or delete an image.
, touch #, and then enter the shortcut number.
24