Sharp MX-C358F User Manual page 132

Use printer menus
Menu item
Speaker Volume
Low*
High
Ringer Volume
Off*
On
Note: An asterisk (*) next to a value indicates the factory default setting.
VoIP Settings
Menu item
VoIP Protocol
SIP*
H.323
STUN Server
Force Fax Mode
Off
On*
Force Fax Mode Delay
0–15 (7*)
Note: An asterisk (*) next to a value indicates the factory default setting.
SIP Settings
Menu item
Proxy
Registrar
User
Password
Auth ID
Transport For Registration
UDP*
TCP
Transport For Incoming Calls
UDP*
TCP
UDP And TCP
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Adjust the fax speaker volume.
Enable the ringer volume.
Description
Set the Voice over Internet Protocol (VoIP) protocol.
Specify the STUN server to traverse a firewall.
Switch VoIP gateway from analog to T.38 at the beginning of a fax call.
Set the time delay in seconds when sending another invite of Force Fax Mode.
Description
Specify the IP address of the system that converts the phone number to an IP
address where the fax is sent.
Specify a name or IP address of the system that handles the registration of
Session Initiation Protocol (SIP) clients.
Specify the name of the user for SIP.
Specify the password that is used in registering with the SIP Registrar.
The user name that is used when registering.
Note: If the Auth ID setting is not set, the setting uses the user name of the
User field instead.
Set the SIP transport type for registration.
Set the SIP transport type for incoming calls.
132