Sharp MX-C358F User Manual page 104

Use printer menus
Menu item
Printer Emulations
Emulator Security
Page Timeout
0–60 (60*)
Printer Emulations
Emulator Security
Reset Emulator After Job
Off*
On
Printer Emulations
Emulator Security
Disable Printer Message Access
Off
On*
Fax Configuration
Fax Low Power Support
Disable Sleep
Permit Sleep
Auto*
Fax Configuration
Fax Storage Location
NAND
Disk*
Print Configuration
Black Only Mode
Off*
On
Print Configuration
Color Trapping
Off
1
2*
3
4
5
Print Configuration
Font Sharpening
0–150 (24*)
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Set the page time-out during emulation.
Reset the emulator after a print job.
Disable access to printer message during emulation.
Set fax to enter Sleep mode whenever the printer determines
that it must.
Set the storage location for all faxes.
Note: This menu item appears only when a hard disk or an
ISD is installed.
Print non‑copy jobs in grayscale.
Enhance the printed output to compensate for misregistration
in the printer.
Set a text point-size value below which the high-frequency
screens are used when printing font data.
For example, if the value is 24, then all fonts sized 24 points or
less use the high‑frequency screens.
104