Sharp MX-C358F User Manual page 133

Use printer menus
Menu item
Transport For Outgoing Calls
UDP*
TCP
Outbound Proxy
Contact
Realm
SIP Registration Status
Note: An asterisk (*) next to a value indicates the factory default setting.
H.323 Settings
Menu item
Gateway
Gatekeeper
User
Password
Enable Fast Start
Off*
On
Disable H.245 Tunneling
Off*
On
Disable Gatekeeper Discovery
Off
On*
Note: An asterisk (*) next to a value indicates the factory default setting.
T.38 Settings
Menu item
Indicator Redundancy
0–5 (3*)
Low Speed Redundancy
0–5 (3*)
High Speed Redundancy
0–5 (1*)
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Set the SIP transport type for outgoing calls.
Specify an outbound proxy to forward all SIP communication.
Specify a contact name for SIP.
Specify a realm name for SIP.
Note: If the Realm setting is not set, the setting uses the name of the Contact
instead.
Show the status of the SIP Registration.
Description
Specify the H.323 gateway IP address.
Specify the H.323 gatekeeper.
Specify the user name used with the H.323 gateway.
Specify the password for the H.323 gateway.
Enable Fast Start.
Disable H.323 Tunneling.
Disable H.323 Gatekeeper Discovery.
Description
Set the number of times that a fax indicator is repeated in the T.38
communication.
Set the number of times that low speed data is repeated in the T.38
communication.
Set the number of times that high-speed data is repeated in the T.38
communication.
133