Navigating In Menus - BEA IXIO-DT1 Quick Start Manual

DISPLAY DURING NORMAL FUNCTION
Activation
impulse
FACTORY VALUE VS. SAVED VALUE

NAVIGATING IN MENUS

1) Push to enter the LCD menu.
= scroll
CHANGING A ZIP CODE
1) Navigate to menu 3 (Diagnostics).
To activate the new ZIP code, you must validate the last digit (see below):
v = valid ZIP code (values will be changed accordingly)
x = invalid ZIP code (no values will be changed)
v/x = valid ZIP code, but from a different product
ZIP code
...
H24 1 56-KG4
01 0 800/02F
VALUE CHECK WITH REMOTE CONTROL
Page 4 of 12
HOW TO USE THE LCD
Safety Negative display = active output
displayed value
=
factory value
2) Enter password, if necessary.
Password
Not during the first minute after
power-on of the sensor.
= select
ZIP code
V
Pressing a parameter symbol on your remote control displays the saved value
directly on the LCD screen. Additionally, the green LED will blink the number
of times that the parameter is set to. Do not unlock first.
Note: When querying FIELD SHAPE, the green LED will blink the number of
times that it is set to, and then the green LED will blink either 1 time (narrow
shape) or 2 times (wide shape).
3) Select language before entering the first LCD menu.
X X X X
See application note on ZIP CODE (76.0024).
2) Select "ZIP code".
ZIP code
ID #
*only available values
will be changed*
To adjust contrast, push and turn
the grey button simultaneously.
During normal function only.
displayed value
=
saved value
During the first 30 seconds after power-on of the
sensor or later in the diagnostics menu.
Select Back to
return to previous
menu or display.
Select More to go to next level:
- basic settings (MENU 1)
- advanced settings (MENU 2)
- diagnostics (MENU 3)
3) Change the code as desired.
ZIP code
E24 1 56-KG4
01 0 800/02F
ZIP code
E24 1 56-KG4
01 0 800/02F
ZIP code
E24 1 56-KG4
01 0 800/02F
ZIP code
H24 1 56-KG4
01 0 800/02F
75.5751.12 IXIO-DT1 20230913