Panasonic S-22MU2E5BN Installation Instructions Manual page 56

(4) Setting the Flap Separately
1) The 4-air outlet flap can be adjusted separately
during operation. When not adjusted separately,
all flaps operate in the same manner.
<Procedure of CZ-RTC5B>
Refer to Section "Flap Setting for Each Air Outlet" in the Operating Instructions attached
to the optional High-spec Wired Remote Controller.
<Procedure of CZ-RTC4>
Stop the system before performing these steps.
1 Press and hold the
simultaneously for 4 seconds or longer.
2 If group control is in effect, press the
to set. At this time, the fan at the indoor unit
begins and select the address (unit No.) of the
indoor unit operating.
3 Designate the item code "XX" by adjusting the
Temperature Setting
XX=90
XX=91
XX=92
4 Press the timer time
* Setting data "YYYY"
Setting data
Without separate setting
Swing
Move to position
Move to position
Move to position
Move to position
Move to position
N OT E
The flap swings during the operation under "Setting the Flap Separately".
At this time, the unselected flaps are moved to the position 1 .
5 Press the button.
(The display stops blinking and remains lit, and setting is completed.)
If you wish to change the selected indoor unit, follow Step 2 .
6 Press the button to return to normal remote controller display.
, and
/ buttons.
Electrical component box
XX=93
/ buttons to select the desired setting data.
Flap position during operation
and stay
1
and stay
2
and stay
3
and stay
4
and stay
5
buttons
3
button
6
Flap position
3
4
5
56
Air outlet flap
(adjustment for up-down airflow direction)
XX
°
YYYY
°
A
1
2
4
2
4
2
5
1