Table of Contents
Advertisement
<Procedure of CZ-RTC6 series>
Stop the system before performing these steps.
1 Keep pressing the
simultaneously for 4 or more seconds.
The "Maintenance func" screen appears on the LCD
display.
Maintenance func
ECONAVI
nanoeX
RC. setting mode
[
]
2 Press the
or
Select "Detailed settings" on the LCD display and press the
button.
The "Detailed settings" screen appears on the LCD display.
3 Select the "Unit no." by pressing the
After selecting "Unit no.", press the
to Step 4 .
If the
button is pressed, proceed to Step 6 .
4 Select the "Code no." by pressing the
Change the value by pressing the
After selecting "Code no." , press the
Step 5 .
5 Select one of the "Set data" in "Table for DC Fan Motor Tap
Settings" by pressing the
After selecting "Set data", press the
continuously, follow the procedures from Step 3 .)
6 If the
button is pressed under the display Step 3 , the
following display (Detailed setting-end screen) appears.
Then select "YES" by pressing the
the
button.
NOT E
The wired remote controller illustrated below can also be available following the same
procedures as above.
White
,
and
buttons
XX / XX
[
]
button to see each menu.
or
button.
or
button.
button and proceed
or
button.
or
button to [00005D].
button and proceed to
button. (If setting
or
button and press
55
Black
Maintenance func
XX / XX
Simple settings
Detailed settings
Auto address
[
]
[
]
Detailed settings
Unit no.
1-1
Code no.
000010
Set data
0001
0001
[
]
[
]
Detailed settings
Unit no.
1-1
Code no.
00005D
Set data
0001
0001
[
]
]
[
]
Detailed settings
Unit no.
1-1
Code no.
00005D
Set data
0001
0001
[
]
]
[
]
Confrm
Detailed settings
Exit detailed
Unit no.
1-1
settings
and restart?
Code no.
10
YES
Set data
0001
0001
NO
[
]
[
]
- Quick Links:
- How to Install the Indoor Unit
Hide quick links:
Advertisement
Table of Contents
