Panasonic S-22MU2E5BN Installation Instructions Manual page 35

(3) Remove the lid located on the bottom of the indoor unit attaching the electrical component
box by unscrewing the Phillips head tapping screws (×2).
(4) Lead the wires from the power supply inlet to the unit. Be sure to lead the wires through the
power supply inlet. Make sure that no wire is caught between the indoor unit and panel for
cassette. Otherwise, the unit may cause a fire.
(5) Connect the wires into the terminals through the power supply inlet for the electrical
component box.
Fix the wires with a clamping clip.
(6) Reinstall the lid of the electrical component box in its original position with paying attention
not to have the wires caught in the lid.
See Section "4. ELECTRICAL WIRING".
Tapping screw position
35