How To Install The Panel For Cassette - Panasonic S-22MU2E5BN Installation Instructions Manual

7. HOW TO INSTALL THE PANEL FOR CASSETTE

Accessories
Panel for cassette ×1
7-1. Preparation for Panel for Cassette Installation
(1) Checking the unit position
1) Check that the ceiling hole is within this range:
860 mm × 860 mm to 910 mm × 910 mm
2) Confirm that the position of the indoor unit and the ceiling as shown in the diagram. If the
positions of the ceiling surface and unit do not match, air leakage, water leakage, flap
operation failure, or other problems may occur.
A : Be sure to necessarily make a space within the range of 12 mm ~ 17 mm.
If not within this range, malfunction or other trouble may occur.
CAUTION
● Never place the panel face-down.
Either hang it vertically or place it on top of a projecting
object. Placing it face-down will damage the surface.
● Do not touch the flap or apply force to it. (This may
cause flap malfunction.)
7-2. How to Install the Panel for Cassette
(1) Removing the air intake grille
1) Remove the 2 screws on the latch of the air intake grille. (Reattach the air intake grille
after installation of the panel for cassette.)
2) Slide the air intake grille catches in the direction shown by the arrows 1 to open the
grille.
Screws ×4
4 × 12
A
Ceiling side
Hinges of air intake grille
Air intake grille
Main unit
Ceiling opening
dimension
Panel for cassette
Screw
Latch
47
Flap