Chapter 2: Removing And Installing Components; Recommended Tools; Screw List - Dell P92F Service Manual
Hide thumbs
Also See for P92F:
- Service manual (77 pages) ,
- Technical manualbook (38 pages) ,
- Setup and specifications (25 pages)
Table of Contents
Advertisement
Removing and installing components
NOTE:
The images in this document may differ from your computer depending on the configuration you ordered.
Recommended tools
The procedures in this document may require the following tools:
● Phillips screwdriver #0
● Phillips screwdriver #1
● Torx #5 (T5) screwdriver
● Plastic scribe
Screw list
NOTE:
When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and
then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is
restored when the component is replaced.
NOTE:
Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when
replacing a component.
NOTE:
Screw color may vary with the configuration ordered.
Table 1. Screw list
Component
Base cover
Battery
Battery
Solid-state drive thermal
bracket (SSD1 slot)
8
Removing and installing components
Secured to
Screw type
Palm-rest and
Torx M2.5x4
keyboard assembly
System board and
M2x4
palm-rest and
keyboard assembly
System board and
M1.4x6.3
palm-rest and
NOTE:
keyboard assembly
screw also
secures the
solid-state drive
thermal bracket
(SSD1 slot) to the
system board.
Palm-rest and
M1.4x6.3
keyboard assembly
NOTE:
screw also
secures the
battery to
the palm-rest
Quantity
8
6
1
This
1
This
2
Screw image
Advertisement
Table of Contents
